The base base of a straight skirt according to the design method of the CNIIShP (russian language)

For the construction of the drawing of the base was used the method of construction CNIIShP.

The base is built without allowances for seams and hems on a typical figure with the basic dimensional features Height - 164 cm, chest circumference - 96 cm, waist circumference - 100 cm.

This drawing is intended for use as a basis for modeling. And also for a visual example of work in the program Valentina. 

The drawing shows the case for widening the skirt bottom line, as well as a skirt with a seam or pleat in the middle.

To draw a straight skirt the following measurements were used:

• St - Half waist circumference;
• Sb - Hip circumference;
• Dts - Waist length of the back;
• Vlt - Height of the waistline;
• Bk - Height of the knee point;
• Dsb - Distance from the waistline to the floor at the side;
• Dsp - Distance from the waistline to the floor at the front;
• Dtk - Distance from waist line to the knee point.

In constructing the drawing, the tool notes were added, tools were used: "Visibility Groups", "Reflect along line", "Point along line", "Point at end of segment", "Curve", "Tool to make a point from x and y two other points".

There are no details and no layout in the drawing.

You will be provided with a drawing file, 3 women's type measure files and a file (recipe).

Warning. This base has not been sewn.